We know that all products need maintenance in order to prolong their service life and work efficiency, so we use the single head electric heating tube is no exception, the following are a few points on the maintenance of several suggestions.
1) Store the single-head heating tube in a dry place, especially in a high humidity environment.
2) Protect the leads of the heating pipe to avoid wear and do not expose to contaminants, such as grease and the outlet of the injection molding machine.The working environment of wire shall not be higher than 450 ℃.
3) The operation of the equipment shall be controlled by temperature and kept in good working condition, and the operation of the equipment shall comply with the specifications;
4) Because all heating tubes have a tendency to absorb moisture from moist air, they may accumulate moisture during transportation or storage.So if the insulation resistance value is low (less than 1 meohm) the heating tube can be placed in the oven to bake for a few hours or at the beginning of the operation using a low voltage to remove moisture.






























