What cause the the fuse of washing machine heater element and how to improve it
The fuse is protected not only by temperature, but also by current. If one of them exceeds the standard, it may be blown.
Therefore, it is suggested to find the reasons from the following aspects:
1. Does the insulation of the damaged washing machine heater element decrease? If it falls, it may be caused by excessive leakage;
2. Is the connection between the fuse and the electric hot wire of the lead rod in good connect? If the connect is poor, it will also cause temperature rise and fuse;
3. If the insulation of the heater is too low, it is necessary to find the reason why the insulation of the heater drops;
4. The second connection method, if the manual operation by workers, may be caused by artificial (example punch pressure is not enough, not in place, etc.);
5. In a word, this situation is a comprehensive quality management problem, which can only be solved by finding out the problems one by one on site.
The way to improve:
(1) Grounding resistance tester;
(2) add spot welding at the joint;
(3) the ambient humidity of electric heat pipe before sealing is less than 70%;
(4) The finished product leaves the factory after it is wet (full inspection with power in water, input voltage 300V, only 3 minutes can be detected)
To achieve the better using,please choose and use our washing machine heater element
High Power Washing Machine Heating Element
Washing Machine Heating Element with Thermostat






























