The reason why mold heating element has short life

Nov 09, 2021

Leave a message

The mould heating element is a cartridge heating element that is widely used. As long as it is used to open holes for metal modules and install the heating pipe to achieve the heating purpose, it is the mould heating element. But there are many customers who respond that the mold heating element will not be used for long. Why ? Today, I will analyze the reason why the mold heating element does not have a long life.



First, power design

The power of the heating element of ordinary mould should not be too large, and the normal surface load should not exceed 8W /cm2.  The greater the surface load of the heating element exceeding this standard mold, the shorter its life.

Second, material selection


Mold heating tube belongs to air electric heating element, so its working environment, working temperature different choice of material will be different.

The working temperature is about 100-300 degrees, and the heating tube is made of 304 stainless steel.

The working temperature is about 400-500 degrees, and can be made of stainless steel 321.

The working temperature is about 600-700 degrees, and the material of stainless steel 310S should be selected.


Therefore, the material is not chosen correctly, which is also the reason for the short life of the single-head heating tube of the mold. And whether the mold has vibration, if there is vibration to use good flexibility of nickel chrome wire.


Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.