Knowledge

If you are interested in immersion heaters, you have come to the right place. We are experts in the heater business and are proud to say we manufactur

When installing a band heater, it is important that it should be well seated on a clean smooth surface and be tightened so that good heat transfer occ

Cartridge Heaters can be a great choice for many applications that require heat. If used and controlled properly, cartridge heaters can provide a long

Many heater elements should be equipped with temperature control instruments to achieve temperature control. There are two ways to detect the temperat

ETDZ designs and manufactures custom silicone rubber heaters for orders large and small. From Medical and Laboratory to Energy and Electronics we have

Gas heating First to ensure that the installation location is well ventilated, so that the heat generated by the heater can be quickly transferred. Ca

1.Cartridge heater used in air If we use the catridge heater element in the air ,First of all, ensure that the ventilation of the installation locatio

#1 Avoiding Contamination Both mica band heaters and ceramic band heaters are vulnerable to contamination. Moisture is noticeable contaminants. If suf

Finned heater with winding straight rod type Finned heater with winding U type Finned heater with winding W type Finned heater with winding square typ

Single-Ended Straight Termination The Electrical Termination is located at one end of the heater and exits straight out from the heater. External Pins

CAST-IN BAND HEATERS Cast-In Band Heaters are manufactured in aluminum alloys because this material provides very good thermal conductive properties.

High temperature (840 deg F) fiberglass insulated wire is connected externally to the two solid pins exiting from the cartridge. For high temperature