Gas heating
First to ensure that the installation location is well ventilated, so that the heat generated by the heater can be quickly transferred. Cartridge heater with a high surface load are used in a poorly ventilated environment may increase surface temperature excessively, which may burn out the heater.
Liquid heating
Sheath should be selected based on the type of liquid, especially when liquid is corrosive and corrosion resistant material is required. The surface load of the cartridge heater must be controlled according to the medium of the heating liquid.
Mold heating
Reserve a mounting hole on the mold according to the size of the cartridge heater (or customize the outer diameter of the heater according to the size of the mounting hole). Please minimize the gap between the heating tube and the mounting hole within 0.05mm.































