The cartridge heating element is made of metal tube as shell, and the alloy electric heating wire is loaded in the center axial direction as heating material. The oxide powder with good insulation and thermal conductivity is filled and compacted around the alloy wire. One end is sealed, and two terminals or leads are provided at the other end.
Single head heating rod tail lead can be classified into internal lead and external wiring two styles.
The inner lead is the lead of the cartridge heating element directly from the tube, and the outer wiring is led from the inside of the heating rod by the binding post, and then connected with the lead. The production process of both is different, the external connection is generally the way of domestic heating element, the internal lead is the use of imported material production, its surface load is higher than the single head heating rod of the external connection, the relative production cost is much higher than the external connection.































