Common sense about the installation threads of heating element

May 29, 2025

Leave a message

The installation thread of the heating element is common for us. Generally, it serves to fix the connection.

Generally, the installation threads are classified by metric threads, usually represented by "M", and UNC threads, usually represented by "G". The pipe threads are generally UNC threads, with a thread Angle of 55 degrees, while the Angle of metric threads is 60 degrees.

Metric threads are showed by pitch, while UNC and British threads are showed by the number of threads per inch. This is the biggest difference between them.

During the manufacturing process of heating element, metric threads are generally used for fasteners. Therefore, most fasteners are represented as "MXX*XX", for example, "M12*1.5", which means that the thread diameter of the fastener is 12mm and the thread spacing is 1.5mm.

When it comes to threaded flange heating element, the pipe threads are generally represented in the UNC system. Therefore, the threaded threads are all indicated by "GXX", for example: "G11/2", which means: 1.5-inch pipe thread.

 

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.