Bimetal rod type thermostat

Data

Description

Bimetal rod type thermostat is used to regulatethe temperature of the water in the cylinder. Once the water in the cylinder has reached a set temperature, the thermostat switches off the power supply to the heating element. If the temperature of the water heater cylinder decreases – due to hot water being drawn or simply through natural cooling – the thermostat will trigger the heating element until the water has reached the set point once more.It is important in terms of your comfort, your wallet and your safety. Maintaining a water temperature of 60°C within your hot water tank will satisfy all your hot water needs while limiting your energy consumption. This will also help to avoid the risk of scalding and protect the hot water cylinder from limescale.

The thermostat is the main component of the electric water heater, with which it can be automatically switched on and off and always heated within a preset temperature range.

The thermostat can be classified  into mechanical and electronic two types, as we usually see the knob temperature control is a mechanical type, and the button temperature control is electronic type. The mechanical type is divided into three types: insert rod type, capillary rod type (liquid expansion type) and bimetal plate type.

Bimetal rod type thermostat is direct plug rod thermostat. These thermostats with temperature control and safety limiter has reliable design and is easy for installation.

The key advantage of the Bimetal rod type thermostat is that it combine temperature regulation and safety features for easy installation on compatible immersion heaters.Thermal regulation can be adjusted within a custom temperature range and lever options can be selected depending on your product implementation.

With Ecoflex technology options, high levels of ERP performance can be achieved, energy consumption levels can be optimized, or high-power heaters can be achieved in compact water heater designs with highly sensitive dry safety devices.

Installation

Proper thermostat selection and installation will result in safe operation, and acceptable heater control.

1. Locate the thermostat in an area where ambient temperatures do not exceed 150°F (66°C)

2. If thermostat is not already enclosed in an electrical housing, then enclose the thermostat to the following area:

• prevent electrical shock to personnel through accidental contact
• if applicable, prevent fire or explosion when flammable gases or vapors, flammable liquids, combustible
dust, or ignitable fibers

Focus technology

Safe options: bimetal sheet technology or high performance patented memory spring technology.
Choose an ERP version with a unique relocatable ECO position and higher accuracy.
Pilar terminals for reliable power wiring

Features

1.Quick & easy through plag-in system with our RT and RF series heating elements

2.Patented Double Safety device acting on the steam and on the bimetal disk Reduction on mounting and wiring 3.costs End-Customer or OEM adjustable control temperature

4.Multiple control knob options available

Bi-polar Copper Electric Safety Thermostat is the main control component for most water heaters. It controls both the upper and lower elements. A thermostat is essentially a temperature-activated switch. When the thermostat senses a water temperature below its set point, it will energize one of the elements in response to this "call for heat."



 

Hot Tags: Bimetal rod type thermostat, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, capillary easy heat, water mixer thermostat, Single element water heater thermostat, Single pole thermostat, Bi polar Copper Electric Safety Thermostat, water line thermostat