If the electric heater needs certain safety measures in actual use, the voltage requirements, timely shutdown, avoid empty burning, placement position, tightening parts of these five aspects of maintenance, so that the electric heater can ensure the safe use of the electric heater in operation.
Safety use measure 1: voltage requirements
The first requirement is the working standard voltage.The standard working voltage of the mechanical equipment should not exceed 1.1 times of the rated voltage, and the shell of the convenient and safe protective equipment should contact the ground completely smoothly.The electric heater under the working condition is not so easy to control. It is necessary to start the mechanical equipment soon after normal use. It is necessary to ensure that the equipment is very low.
Safe use measure 2: timely shutdown
Turn off the electric heater in time.After using the electric heater for a period of time, avoid having a layer of dirt on it. If not cleaned, it will lead to re-use, affect the heating efficiency and the internal heat of the equipment, and even damage the service life of the equipment.Clean after use for long also do not want too hard, can buy professional washing prop.
Safe use measure 3: avoid empty burning
Electric heaters should avoid empty burning.Electric heater is the most taboo is empty burning, but many staff do not pay attention to, in the electric heater heating equipment material, must maintain sufficient heating fuel, to avoid empty burning.The result of empty burning is serious, sometimes explosion and other situations may occur.
Safe use measure 4: placement position
The electric heater is placed in proper position.The machine and equipment should be placed in a dry and ventilated place. Damp and gray places are easy to let moisture penetrate into the inside of the machine and equipment. It must be dried or air dry before use next time.
Safety use measure 5: tighten the parts
Electric heaters need to tighten the parts in time.After using for a period of time, the internal parts of the mechanical equipment will appear loose, should be tightened immediately, to avoid the loss of parts, damage to all the normal use of the mechanical equipment.For the parts that must be removed, the best specifications and models are the same as the original ones.
When the electric heater is heated, we must pay attention to these five situations. If there is a problem, it will lead to internal damage of the electric heater equipment. It is recommended to maintain the electric heater in time.
