Adjustable Bimetal Thermostat With Double Safety

Adjustable Bimetal Thermostat With Double Safety

There are three different types of thermostat which function using different types of technology.
Send Inquiry
Description

Data Sheet

No. Main Parameter
1 Model No. WNC-9
2 Work temperature 20-105℃
3 Type Double Safety
4 Length 270mm or as you required
5 Certification CE.ROHS.IEC60730
6 Tube material Copper
7 Rated Current 16A

 

Description

 

Water heater thermostat is a vital part that plays the most significant role in heating the water. It maintains the heating process and provides you with perfectly tempered water every time you use your geyser. If you want to know the working process of the thermostats, make sure that you go through our explanations.

Adjustable Bimetal Safety Thermostat, including base, copper pipe, alloy wire, temperature control system and overtemperature protection system composed of thermostat nut, one end of the copper pipe is fixed on the base, the alloy wire through the copper pipe, one end of the alloy wire is fixed with the copper pipe, the other end of the alloy wire is connected with thermostat nut.

 

Although the use of bimetal thermostat on electric water heaters started relatively late in China, it has a broader space for development, mainly because of the large-capacity trend of electric water heater consumption.

 

With everyone paying attention to personal hygiene, consumers have a desire to consume large volume water heaters, thus encouraging the use of adjustable bimetal thermostat with double safety. This is because, in addition to bimetal thermostat with double safety , other types of thermostat can not meet the power requirements of large capacity water heaters (more than 100L).

 

In addition to meeting the high power requirements of the whole machine, the biggest feature of the adjustable bimetal thermostat with double safety is that it does not have to contact with the water tank compared with other types thermostat.

Other types thermostat must have "antennae" to extend into the water tank to sense the temperature of the water, so as to control the water temperature. Bimetal thermostat is attached to the outer surface of the inner tank, and the temperature of the inner tank is sensed by the temperature of the inner tank, so it will not be scaled after long use of the water heater.

 

Bimetal thermostat also includes a cover shell, which is arranged on the upper part of the base, and an overtemperature protection device and a small reed group located inside the copper tube. The conductive sheet group constitutes an overtemperature protection system. Two automatic temperature controller and two groups of electric heating tubes constitute the product assembly. Inserted rod type automatic temperature controller of this practical new type USES two sets of real-time heating temperature control mechanism, rapid heating in low temperature, when the temperature reaches a certain temperature, the temperature control of a set of institutions to achieve heat preservation, at the same time of guarantee heating efficiency effectively save resources, on the other hand, the setting of overtemperature protection device, effectively guarantee when temperature control failure, ensure the safety of personal use.

 

Immersion heater thermostat has the certification of CE.ROHS.IEC60730.Color of the switch is yellow and can be customized too.The color of the bottom is red and can be customized,it usually printed some spec of the thermostat such as temperature range,voltage,current.

Immersion heater thermostat maintains the heating process and provides you with perfectly tempered water.

Therefore, the water heater comes with a thermostat. The hot water thermostat maintains a specific temperature every time. Whenever the stipulated temperature goes down, the hot water tank thermostat accelerates the power supply to retain the temperature.

 

Different types of thermostats

There are three different types of water heater thermostat using different types of technology.

Reliable and inexpensive, Bimetal Copper Immersion Rod Thermostat is plugged in. Its long stem expands as the temperature rises.

If the bipolar safety thermostat overheats, it is necessary to reset the thermostat manually. However, this overheating is sometimes caused by a heating element failure; it is therefore strongly advised to check both to determine the origin of the malfunction.

202106291653107d2f33613add4ef5a24ff8dbd10a1c00

 

 

FAQ

Q: What's your MOQ?
A: Normally we accept order with 1,000pcs each model. For regular model, we also accept quantity below 1,000pcs.

Q: What's your delivery time?
A: About 25-30 days after deposit.

Q: After how many days can goods be delivered?
A: Our delivery time will be 25-30 days after deposit paid.

Q: How long will it take to arrive?
A: About 20-30 days by sea and 5-7 days by air.

Q: Can I get sample before order?
A: Yes. The sample fee and freight should be paid at your side. We will return the sample fee if order.

Q: Is it possible to print my logo on the product?
A: Yes. We offer OEM&ODM services. We can print your own logo on product.

Q: How do you guarantee quality?
A: For certificate, we have ISO9001, CQC, CE, ROHS, BEAB. For practical, we will do 100% inspection during production and before shipment.

Q: What if there is any defective goods in my order?
A: We will take the responsibility of products with quality problems if they are caused by us

Hot Tags: Adjustable Bimetal Thermostat With Double Safety, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Electric Hot Water Heating Element Thermostat, Bimetal Copper Immersion Rod Thermostat, Bimetal electric heating element thermostat, 12 Volt Water Heater Element Thermostat, water kettle thermostat, 12v water thermostat

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.