PTFE Immersion Heater

PTFE Immersion Heater

Description Teflon/PTFE immersion heating element Teflon PTFE heating element for acid and alkali Chemical reaction tank. PTFE Coated heating Coils are also available.We can manufacture them in several material types, our most common types of material are Stainless steel and Titanium. Special...
Send Inquiry
Description

Description

 

Teflon coated heating elements is your ideal solution for heating highly corrosive chemicals while maintaining the integrity of your equipment.They are used across various industries to heat different liquid solutions ranging from water to oil.Not only does every PTFE immersion heater come complete with high-grade polytetrafluoroethylene for fighting corrosive chemicals – we've designed our chemical heaters with the features you want to fit the needs of your industry application.

 

Each PTFE  immersion heater undergoes extensive testing before it is shipped, including a "Spark Test" which uses electronic transmission to identify any nicks or cuts in the fluoropolymer large enough to allow an electron to pass through it. When you receive teflon immersion heater, you can be sure your heater is in optimal working condition and that your process won't be held up by malfunctioning equipment.

As electricity passes through the resistive heating element, it heats up. The heat generated is then transferred to the PTFE sheath surrounding the heating element. PTFE has a high melting point and is an excellent insulator.

The design of PTFE immersion heaters is helpful for uniform heating of the fluid,  which promise the evenly heating.

PTFE immersion heaters are commonly used in various industries, including chemical processing, pharmaceuticals, food and beverage, and water treatment.

 

PTFE immersion heater is used in acid-base chemical reaction tanks. Because the teflon  immersion heater has the advantages of non-stickiness, high and low temperature resistance, low friction, corrosion resistance, high insulation, etc., the element has better performance than ordinary heating elements, and the cost will be higher.

 

The shape of the ptfe heater adopts a round coil, because more round shape can increase the heating area and make the heating efficiency high. We also offer PTFE-coated heating coils, as well as a variety of materials to manufacture them, our most common types of materials are stainless steel and titanium.

PTFE immersion heater is used for heating all kinds of corrosive liquids. It has excellent winding performance and low surface load design. The joint adopts fully enclosed acid and alkali protection, non-heating section and overheat protection system according to customer's requirements. Intact to ensure that the heater is not easy to burn, long service life, fully sealed, no corrosion, no leakage, with grounding protection. Applicable temperature below 110°C.It can be designed a variety of structural forms, such as spiral type, L type, U type, W type, mosquito coil type, combined type and so on.

 

 

Data Sheet

 

Item

Teflon/PTFE immersion heater for process heating

Material

Imported PTFE/PFA/Teflon/F4 material

Usage

process heating for all corrosive liquid

scope of

application

metal surface finishing, electroplating,printed circuit board,cleaning technologies, pharmaceutical, food, and biomedical.

Certification

CE and ISO9001:2008

Safety

Anti Dry Design

Testing after finishing the heater

Matched with Thermal Protector

Warranty

1 year( Non-artificial damage )

after-saleservices

conact us by email,skype,MSN,telephone,we will solve your problem.

Voltage

220V-480V

Power

1kw-6kw

Phase

1P only

Terminal Box

PP material,Red, antiflaming

Hot Zone

can be designed

Total length

can be designed

Minimum liquid level

50mm above Hot Zone of heater

Our product sell to USA,Italy,India,Malaysia,Singapore,Korea, Philippines,etc.

It can be designed as your requirement.

 

 

1, Teflon heater select high quality stainless steel (sus316 or sus304) electric heat tube inner core, coat Teflon tube (PTFE) production, corrosion resistance, suitable for all kinds of corrosive liquid heating.

2. The heater adopts low surface power design (1.5w/c square meters) to ensure the service life of the product.

3. The installation position of the teflon heater should pay attention to prevent solid deposition in the solution on the surface of the electric heater, or the liquid is too thick and the liquid level is too low because of poor surface heat dissipation and burn out PTFE.

4, The size of the teflon heater can not be arbitrarily reduced, and change the surface area, otherwise it will make the surface power of the  heater is too large, affect the service life of the ptfe heater.

5. All  heater elements can be equipped with over-temperature protection or PT-100 temperature sensing probe to ensure the service life and safety of the product.

6, the joint adopts fully enclosed acid and alkali proof, no heating section and overheating safety protection system is customized according to customer needs.

 

070819_0633_TeflonImmer2

 

How PTFE immersion heater work?

When the PTFE immersion heater is connected to the power source, current flows through the heating element. The resistance heating element creates resistance to the current, thereby generating by-product heat.When current passes through the resistance heating element, it will heat up. Then the generated heat is transferred to the PTFE sheath around the heating element. PTFE has a high melting point and is an excellent insulator that helps suppress heat and prevent it from dissipating into the surrounding environment.

PTFE immersion heaters are designed for direct immersion in fluids that need to be heated, such as water, oil or chemicals. When the PTFE sheath heats up, it transfers heat to the surrounding fluid through conduction.The design of the PTFE immersion heater can evenly heat the fluid, ensuring uniform heating throughout the entire volume. This is very important for applications that require consistent temperature control.

Some PTFE immersion heaters have temperature control functions, such as thermostats or temperature sensors. These controllers cycle on and off the heaters as needed to maintain the required temperature, thereby helping to regulate the temperature of the fluid.

 

 

Typical Applications

 

Compatible with most plating tank solution:insert to acids,anodizing and picking solution up to 190℉(88℃).

Check compatibility guide for proper sheath material selection.

 

QQ20230322115002

 

FAQ

Q: Why choose us?
A: We are professional factory with full export experience. It is sure you buy stainless steel products from real professional manufacturer, you can get competitive price here. We make sure all qualified goods with high quality reach international standard. As experienced exporter, we can give professional advices in transportation method to reduce your cost.

Q: How can I know my order production condition?
A: After receiving down payment, financial confirmation payment letter will be given to you. If necessary, you will receive letters and photos from production department, quality department and package department, so that you can know your order condition.

Q: How can I get urgent feedback?
A: If you need contact with us urgently and we will give response as faster as we can.

Hot Tags: PTFE Immersion Heater, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, 18 inch immersion heater element, 230v 3500w Immersion Heating Element For Water Heating, hot water immersion heater element, brewing immersion heating element, U Shape Tubular Heating Elements, fitting immersion heating element

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.