SUS304 steel immersion water heater

SUS304 steel immersion water heater

Description SUS304 Steel Liquid Immersion Heater Element is a kind of water boiler heating element. The length is 310mm and the power is 1300W,it also can be customized according to customers'requiment.It is flange heater element with casing tube. It is commom shape and can also be...
Send Inquiry
Description

Description

 

Immersion heater element has been widely used in water heating, most of them are stainless steel, some customer still use copper material.SUS304 steel immersion water heater has the advantage of strong corrosion resistance, relatively mature welding process, low overall cost,the disadvantage is that thermal conductivity is slightly worse than copper.

 

Immesion heater element works independently with other heating system,that means if  the boiler do not work or there is no gas,it still can offer hot water,it can still heating the water.This advantage make it as the choice of water heater.

 

But it still have disadvantage:

Immeriosn heater element consumes much electricity, which can be expensive and inefficient compared to green energy.
It can only heat a limited amount of water at a time. If the hot water runs out, it will take time to reheat the water again.

It will get water scale when working,which will reduce the performance and warranty.
 

As the cost of copper material is higher, most heater element use stainless steel, the stainless steel water tank and the same material are dissimilar metal welding when welding the butt ring, flange and other accessories, you must use brazing silver electrode, this electrode is more expensive, which increases the cost, so compared to the copper heater, Stainless steel such as sus304 heating element is more firm and convenient for water tank welding.

 

A direct immersion heating element is inserted directly into the liquid at the top or in a fitting on the side. Its heating element comes in contact with the fluid to be heated. Once positioned, it is turned on and electricity runs through the heating element into the liquid.

 

The material selection for water heater element is determined by the water quality.

The most commonly used material  is stainless steel 304, which can be used to heat ordinary tap water, softened water, distilled water, etc.

Drinking water, medical/chemical process water, we usually  adop stainless steel 304 or stainless steel 316.

 

Sewage, wastewater, groundwater such water quality is hard, have more impurities , material for water heater element is usually stainless steel 316 material;

 

Concerning the corrosive water, heating element's material is usually stainless steel 316 material + anti-scale coating;

Titanium material  are usually used to heat seawater;

 

Therefore, for different water quality, the choice of heater element quality is also different!

 

We manufacture a varied range of immersion water heater for direct immersion into water, oils, resins, food stuffs and many other liquids and gasses. A standard SUS304 Steel immersion heater consists of a number of robust hairpin shaped tubular heating elements welded with a flange.This type of unit gives simple, low cost installation, 100% heating efficiency generated within the solution, and minimum resistance to the circulation of solutions to be heated.

 

Detai Show

20211108164206

 

 

 

Immersion heater styles

Over-the-Side Immersion Flange Immersion Screwplug Immersion

Over-the-Side Heaters Flange Heaters Screwplug Heaters

 

Why Choose Us

HTB1rUCwKr1YBuNjSszh763UsFXaa

FAQ
Q: What's your MOQ?
A: Normally we accept order with 1,000pcs each model. For regular model, we also accept quantity below 1,000pcs.

Q: What's your delivery time?

A: About 25-30 days after deposit.

Q: After how many days can goods be delivered?

A: Our delivery time will be 25-30 days after deposit paid.

Q: How long will it take to arrive?

A: About 20-30 days by sea and 5-7 days by air.

Q: Can I get sample before order?

A: Yes. The sample fee and freight should be paid at your side. We will return the sample fee if order.

There is no risk for have a trying order or samples before our cooperations!


 

Hot Tags: SUS304 steel immersion water heater, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Heating elements and immersion heater thermostats, brewing immersion heating element, 220V Immersion Heater Element, 1000W water Immersion Heater Element, solar immersion heating element, U Shape Water Tubular Electric Immersion Heater

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.