Industrial flange type heater

Industrial flange type heater

Description and data sheet Main features
Send Inquiry
Description

Description 

 

Flange immersion heaters utilize ANSI standard pipe flanges in a range of diameters to support high tank pressures of liquids. A wide selection of watt densities, heating outputs, flange sizes (up to 10" flange), ratings and materials (titanium, steel, Incoloy) make this heater excellent for all tanks, vats, or irregularly shaped vessels. 

 

Industrial flange type heater is used for heating oils, liquids, and gases in large quantities. Also known as process heaters, flange heater is available in variety of sizes and outputs to suit a wide range of applications.It is designed for use in tanks and pressurized vessels, they are easy to install and maintain to provide heat for many processes. The direct immersion method is energy efficient and easily monitored and controlled.A wide selection of watt densities, heating outputs and flange sizes and ratings make flange heater an excellent heater for all tanks, vats or irregularly shaped vessels.

 

In the field of industrial heating equipment, the flange type heater is a heating tube with a high frequency of use, with its power advantages, it has been widely used, at the same time, the industrial  flange type heater is generally used to heat the liquid, all are also called immersion heater element. In the industrial area, the installation method of this flanged heater become a problem of concern. This problem needs to be considered in advance when we design the heating element, because the design is different in different installation methods.The common way is as follows:

 

1.Screw plug or threaded type.(Rubber gasket will be used).

2.Flat flange type(flange and female flange is fixed by bolt,also use rubber gasket,if more sealing require,welding process can be used).

 

At 50 W/in², square flange heaters present a simple, economical method of heating liquids in pen tanks and low-pressure vessels such as wash tanks, oil and hot water boilers.Low-watt-density flange heaters are 23 W/in² and consist of hairpin tubular elements welded and brazed into an ANSI pipe flange, and are provided with wiring boxes for electrical connections.At 48W/in², standard-watt-density flange heaters consist of hairpin tubular elements welded and brazed into an ANSI pipe flange, and are provided with wiring boxes for electrical connections.

Flange-Drawing

 

 

 

 

flange-top

 

 

 When using industrial flange type heater, we need to be aware of some precautions to ensure the safety of the product and its long-term service life.

1. The heating elements are allowed to operate under the following conditions: A. The relative humidity of the air should not exceed 95%, and there should be no explosive or corrosive gases. B. The working voltage should not exceed 1.1 times the rated value, and the shell should be effectively grounded. C. The insulation resistance should be greater than or equal to 1 MΩ, and the dielectric strength should be 2 KV/1 min.

2. Industrial electric heater should be fixed in position. The effective heating area must be immersed in a liquid or a solid metal. It is strictly prohibited to burn without any liquid. When water scale or carbonization is found on the surface of the tube, it should be cleaned promptly before reusing to avoid shadow cooling and shorten the service life.

 

 

Preventing overheating in a flange type heater is essential to ensure the safety of the equipment.

The following tips you can adoped:

1.Install a temperature controller or thermostat to get the right temperature range. 

2. Choose a flange heater with the appropriate wattage for the application.  High  wattage can lead to overheating. 

3. Ensure that there is airflow and ventilation around the flange heater. 

 

 

Data Sheet

Flange size DN 50 to DN 800
Screw plug size 1"- 3"
Tube Diameter 8-16 mm
Immersion Length 10mm to 6000mm
Heating Element 3 elements, 4 elements, 6 elements, 10 elements etc under customer request
Wattage density 2-8W/cm2
Voltage 220V-380V
Sheath Material Stainless Steel 304 316L 310S Copper Incoloy 800 840
Built in thermostat well Built-in thermostat wells can be installed upon request. When ordering, please provide length BUILT-IN THERMOSTAT WELL and internal diameter

Main features

 

1.We offer standard as well as customized models.
2.We offer different tube diameters like 6.5mm,8mm.8.5mm,9mm,10mm,12mm and others, different length range 10mm to 6000mm .
Voltage: 220V-380V
Wattage: Customized
3.We offer different sheath materials. It can be availed in different materials like Incoloy 800, SS 304, SS 321, SS 316, Copper & Titanium.
4.We offer various shapes as customer demand, immersion heater with flange or screw, explosion proof heater.
5.Various terminal options are available.
6.Various shapes and sizes are available.
7.Durable and has longer life..

 

2" flanged heater

 

4895

3" flange heater

 

4895

4" flange heater

4895

5" flange heater

 

4895

 

Certification

201904171848597389241

FAQ

201907191749025612254

Hot Tags: Industrial flange type heater, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Industry Oil Heater Immersion Heating Element, U Shape Tubular Heating Elements, Domestic Immersion heating element, 220 V 2KW Stainless Steel Immersion Water Heater element, titanium immersion heater element, Water Heater Element U Shape 24v 300w

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.