304 Stainless Steel Channel Strip Heater

304 Stainless Steel Channel Strip Heater

Description Strip heaters are used maily for convection-type air heating and clamp-on installations. When choosing strip heaters, two important factors must be considered: The proper sheath material for resisting any rusting and oxidizing inherent in the process or environment and for...
Send Inquiry
Description

Description

 

The thick rectangular stainless housing of these heaters provides a rugged construction suitable for industrial applications.304 stainless steel channel strip heaters have relatively larger exposed surfaces compared to regular channel heaters. This makes them highly efficient in transferring heat in both natural and forced convection space heating.

 

304 Stainless Steel Channel  strip heater is used maily for convection-type air heating and clamp-on installations. When choosing finned strip heater, two important factors must be considered: The proper sheath material for resisting any rusting and oxidizing inherent in the process or environment and for withstanding the sheath temperature required.

 

Standard sheath materials are rust resisting iron, chrome steel and Incoloy (NS Series only). Stainless steel and Monel sheaths are available at an additional charge. Maximum work and sheath temperatures are below.

 

Finned strip heater is often referred to as a component heater, it is an electric heating element that maximizes heat intensity and efficiently transfers heat over an area.  They are excellent industrial heating element that can be easily controlled by heating control panels, mechanical thermostats or cost-effective bimetal thermostats mounted on the heater surface. Mounting holes are used to securely mount the heater to the wall housing, with terminals extending from the sheath for easy electrical connection. Many users also require the lead to be extended from one end to make the installation more flexible, as the temperature controller can easily adapt to this configuration.

 

304 Stainless Steel sheath provides physical strength and resistance to high temperatures of up to 1200°F (650°C) and chemical corrosion. Helically wound resistance wire coil made from nickel-chrome wire is evenly stretched and precisely strung through the ceramic insulator, providing uniform heat. A custom mixture of several high purity magnesium oxide grain sizes, chosen to increase thermal conductivity and dielectric strength, are used to fill all remaining space inside and around the ceramic insulator. Channel strip heaters are available with or without mounting tabs. 

 

The heavy-duty stainless steel sheath and welded stainless steel end caps of the Ultima eliminate distortion and deformation problems often associated with other strip heaters when operating at higher temperatures.

 

product-480-480

 

Product detail

product-1000-357

 

Construction

product-500-190

 

1.Seamless stainless steel sheath

2.Post terminals

3.Ceramic element support

4.Element wire is situated in close proximity to outside surface for maximum heat transfer and minimum internal temperature while preserving good  dielectric qualities.

5.Magnesium oxide packing

6..Aluminum fins offering maximum radiating surface and providing for rapid heat transfer to the surrounding medium. Stainless steel fins are available for corrosive environments. Aluminum fins are standard.

 

 

product-750-400

 

Width

1.500 ±.010

Length

Up to 5 1/2"

Mounting tabs

Available mounting tabs with holes,slots or without tabs

Terminations Type

Off set terminations,Parallel terminals,terminal at each end or lead wires available

Power

2~3.5w/cm2

 

More strip heater type

 

CERAMIC STRIP HEATER    PERMAHEAT STRIP HEATER  HT MICA STRIP HEATER       CONDUCTIVE ULTIMA STRIP HEATER

product-400-314product-400-271product-400-257product-400-200

 

 

 

 

Application

 

1.Food
2.Room heaters (with fins)
3.Hot plates
4.Dies
5.Hot Knives
6.Sealing applications
7.Subway and rail car heating

product-1000-1000product-400-225

 

 

 

Hot Tags: 304 Stainless Steel Channel Strip Heater, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Double Tube Finned Air Heater Element, finned discharge heating element, 240V 6KW Electric Air Finned Tubular Heating Element, W Shaped Finned Heating Element, Air Tube Square Fin Electric Heating Element, finned tubular air heating element

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.