1 Meter Finned Heater Element For Oven

1 Meter Finned Heater Element For Oven

Data Sheet and Description Component Details 1 meter finned spiral heating element for oven is composed by High Temperature magnesium powder ,professional terminal,thickened stainless steel,resistance wire and so on.The length and can be customized.
Send Inquiry
Description

 

Sheath material SUS304.321.316,Incoloy800.840
Heat intensity Not exceeding 30Wcm2 (advisable)
Tolerance of length +/-1.5%
Tolerance of diameter -0.01 a -0.06 m/m
Escape of current (when cold) <=0.1mA a 242 v
Insulation (when cold) 5 Min Ohmios 500 Watts minimum
Dielectric strength 1500v. 1/seg
Tolerance of cut of connexion +/-15 mlm
Power tolerance (w) 5 % - 10 %
Wattage tolerance +5 percent, -10 percent

 

Description

HTB1XxZ0c56guuRjy1Xdq6yAwpXaN

 

Finned tubular heater provide a rugged, cost effective, and efficient solution for a wide range of air heating applications.

1 meter finned spiral heating element for oven is composed by High Temperature magnesium powder ,professional terminal,thickened stainless steel,resistance wire and so on.The length and can be customized.

 

product-830-742

Here Is What Makes The  Finned Tubular Heating Elements Your Obvious Choice! 

1. A variety of sheath materials are available for different application conditions. 

These take into account corrosion and temperature factors. Let us help you choose the optimum sheath material to ensure the longest possible life for your application. Sheath materials include: 

a. Steel

b. Copper 

c. Titanium 

d. Incoloy 800 

e. Incoloy 840

f. Inconel 600 

g. 304 stainless steel  or 201 stainless steel

h. 316 stainless steel

Why sus201 material is cheaper than the sus304 material? Sus201 material is composed of 17Cr-4.5Ni-6Mn-N,After cold processing, it has magnetic properties, high manganese content, bright surface with dark bright, high manganese content and easy to rust.

SUS304 is composed of 18Cr-9Ni,it is the most widely used stainless steel and heat-resistant steel, it contains more chromium, the surface shows matte, no rust.

SUS304 's heat resistance is better, dry burning resistance, technology is more mature, the cost is slightly higher than SUS201 material.

The most important point is that the corrosion resistance is different, the corrosion resistance of sus201 is very poor, the heating tube is prone to breakdown, affecting the life of the finned heater element, so the price is much cheaper, as sus201 contains low nickel, the price is lower than sus304.

So before customers ordering the finned heater element,we will recommend customer sus304 material.

Why Are Finned Tubular Heating Elements So Widely Accepted For Process Heating? 

Extremely rugged 

Can be formed into many unique and complex shapes 

Can be finned for improved forced air heat transfer 

Easy to precisely control the heat output to perfectly match your process requirements 

Low capital cost 

Negligible maintenance 

Can be used in virtually every industrial environment up to about 1000°F (540°C) Has a proven track record of over many years and applications.

Can finned heater element be used in heating water?

Finned tubular heater  is commonly used to heat air, the biggest difference between the finned air heater and immersion heater is the power design , normal air electric heating tube one meter length to do 1KW power, water heating tube one meter length can do 3KW.

Therefore, the surface load of finned air heater will be smaller than the surface load of the immersion water heater, so the finned air heater can be used to heat water.

Although the finned air heater can be used for heating water,but the material must be sus304,or it will get rust.

Besides,the welding of the finned air heater must be in good state,or if the water pressure influence,will cause the leakage.

 

 

Advantage:

·Increase heat transfer surface area
·Max Sheath Temperature 455°C (850°F)
·Safe to operate
·Durable
·Easy to maintain
·Secondary insulated bushings available

202002161718304873063

202002161718406336776

FAQ

1.

Q:What's your packing?What to do in case of damaged goods during transport?

A1: Our Normal packing is bulking in Cartons, less than 20 kgs/carton, 48 cartons / pallet. We also can pack products according to your requirement.

A2: To avoid any subsequent trouble regarding quality issue, we suggest you check the goods once you receive them. If there is any transport damaged or quality issue, don't forget take the detail pictures and contact us as soon as possible, we will properly handle it to make sure your loss to reduce to the smallest.

2.

Q: What about the warranty? What if the products go wrong?

A: All our products have 1 years warranty, should you have any problems, please contact us directly and we will do our best to solve it.

3.

Q:When can I get the price?

A: We usually quote within 2-3 days after we receive the RFQ or feedback within 2 days if any questions on prints need to be confirmed.

4.

Q:Have the R&D for our company?

A: We have professional R&D team with rich design experience.We also establish strict but scientific product testing system so that products have perfect.


 

 

Hot Tags: 1 Meter Finned Heater Element For Oven, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Air Finned Heater Oven s Heating Elements, 15kw Straight Finned Air Heating Element, Double Tube Finned Air Heater Element, 900 watt finned heating element, Stainless Steel 304 Durable Finned Heating Element, Straight Finned Air Tubular Heater Element

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.