Description
Finned heating element for radiator can change the electrical energy into heat energy, consumption in the heating heating materials, work in low temperature fluid through the pipe under the action of pressure into the input port, along the electric heating container within specific in hot runner, the path of the design with the principle of fluid thermodynamics, take away the heat energy produced by electric heating element work, cause the heating medium temperature.
It achieves the purpose of enhancing heat transfer by adding fins to the ordinary base tube.In terms of economy, the less metal is consumed per unit of heat transferred to a room by a finned radiator, the lower the cost and the better its economic performance.
Finned heating element for radiators should have certain mechanical strength and pressure-bearing capacity. The structural form should be convenient for combination to form the required heat dissipation area. The structural dimensions should be small, occupying less room area and space. The production process of finned heat sinks should meet the requirements of mass production.
In terms of hygiene and aesthetics, the surface should be smooth, free of dust accumulation and easy to clean. The installation of finned radiators should not affect the appearance of the room.
Data Sheet
|
Tube Materials: |
SS304, SS316, SS321 and Nicoloy800 etc. |
|
Voltage/Power: |
110V-380V / 100W-10KW |
|
Tube Dia. : |
4mm-30mm |
|
Insulation Material: |
High Purity MgO |
|
Conductor Material: |
Ni-Cr or Fe-Cr-Al Resistance Heating Wire |
|
Wattage density: |
Crimped or Swaged Leads |
|
Lead wire type: |
10" Standard(Teflon / Silicone high temperature fiberglass |
SURFACE TREATMENTS
Oven Brazed & Annealed
This process produces a thin oxide coating on the fins & sheath. The copper braze material provides a further benefit by coating portions of the sheath. Suitable for most clean air applications containing low to moderate amounts of organic VOC's and moisture.
High Heat Aluminum painted
High heat Aluminum paint available for steel finned units is suitable for use up to 700⁰F. It has good moisture resistance and provides the heater with a rust protective coating for ambient air applications containing organic or non-corrosive VOC's. Recommended for use in most air duct applications.
Nickel plated steel finish
Nickel plated finish is available to provide the highest possible corrosion protection on steel finned heaters. Usable up to 500⁰F for salt water marine applications, air containing high concentrations of organic VOC's, flue gas residues, ammonia, and many other chemical vapors. Please contact Tempco with your specific application requirements.
Bright Annealing
Bright annealed steel or stainless steel finned heaters produce a smooth bright finish. For applications requiring a clean un-oxidized surface with no rust or other contamination. Stainless finned heaters can be used in applications at higher temperatures and where moderate to high concentrations of organic or non-corrosive vapors are present.
When you order the air tubular heating element, pls note below,
1. If U have the drawing, it will be very helpful.
2. Power, voltage and shape that you need.
3. Working temperature.
4. Material requirement
5. QTY
6. Mode of transportation
7. Other requirement required.
Suggested Applications:
♦ Plastic Molds
♦ Dies
♦ Labeling
♦ Medical Equipment
♦ Platens
♦ Packaging Equipment
♦ Hot Stamping
♦ Sealing
♦ Injection Molding
FAQ
1.
Q:Do you carry instead of 220v a 110v model ?
A; NO need to any model to change the Voltage.
2.
Q: How can I get the quotation?
A: We will submit the quotation in 8 hours if getting detailed information during working days.
In order to quote for you earlier, please provide us the following information together with your inquiry.
1). Detailed drawings (CAD/PDF/DWG/IGS/STEP/JPG)
2). Material requirement
3). Surface treatment
4). Quantity (per order/per month/annual)
5). Any special demands or requirements, such as packing, labels,delivery,etc.
3.
Q: Is it possible to return the money if the quality is not good?
A: This has never been occured right now ,as we treat the quality as our key of development.Quality and service is everything for us.
Hot Tags: Finned Heating Element For Radiator, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Straight Finned Heating Element, Thermofin Heating Element, finned tube electric heating element, Stainless Steel Straight Finned Tubular Heater, 220v 2000w Electric Finned tubular heating element, Air Heating Tubular Elements with fins
