-
Fully closed brass band heaterWe offer a full line of nozzle band heaters for the plastics industry as well as slip-on heaters for the medical and analytical industries.read more
-
Casting aluminum band heaterDescription Cast in heater is composed of one or more electrical heating elements embedded in an aluminum alloy, brass, bronze, copper-nickel or iron material with excellent thermal conductivity....read more
-
Mica Band Heater For IndustryDescription 240v 5kw mica band heater was made of stainless steel sheet, mica sheet, resistance wire/ strip , stainless steel sheet standard thickness is 0.3mm to 0.5mm, and in the middle ,...read more
-
Ceramic Band Heater For Injection MachineDescription Screw Barrel Ceramic Band Heater is medium-to-high temperature heaters that have 500℃ as a maximum working temperature. Ceramic band heater provide long life and use less wattage...read more
-
Brass Sealed Nozzle HeaterDescription Brass Sealed Nozzle Heater Band is mainly made of brass tube to seal the heating element, the heating element is made of resistance wire and high temperature resistant mica plate, and...read more
-
Mica Band Heater For Injection MachineDescription Mica band heater element is and ideal solution for high power density and high operating temperature applications, especially in the plastics industry.Mica band can be different...read more
-
Nozzle Band Heater With ThermocoupleDescription Brass Nozzle Band Heater Element with thermocouple is submitted to extremely high pressure that ensure high insulation, excellent thermal exchange, lack of internal voids, perfectly...read more
-
Band Heater For Oil Press MachineDescription Products show Band heaters element for pipe belongs to a conventional shape of mica heater. Mica heater takes mica plate (sheet) as the skeleton and insulation layer, supplemented by...read more
-
Nozzle Band Heater For Injection MachineDescription The interior diameter of the Brass Band Heater For Injection Molding Machine is 80mm. The Height is 25mm Wire 1000mm Wattage: 250W Voltage: 230V Features 1.Lower Operating Cost 2.Safe...read more
-
Industrial Mica Band Heater with PlugThe mica band heaters inside diameter should be equal to the outside diameter of the plastic machine’s barrel.read more
-
Mica Band Heating Element for Injection MoldBand Heaters Made of mica/ceramic insulation, nickel chrome heating wire and stainless steel sheath, Extruder band heaters are the ideal solution for high watt densities and high operating...read more
-
Ceramic Band Heater For ExtruderEasy to installread more
Long service life
Good Temperature Uniformity
A Schematic of HotCoilRod(TM) heating element. Material GAXP(TM) (1450C) Use for Large Furnace Applications. Both Low Power -coils. and High Power the HCR rods. Coils up to 8KW....
YesBTX 220v Cartridge Heater SS 304 Tubular Heater M16 Thread Immersion Water Heating Element 500w/800w/1000w/1200w Rejoicing (Voltage : 220V, Wattage : 1200W 12x250mm)...
High watt density cartridge heater is an extremely durable heating element for high temperature heating up to 800℃ with watt density up to 25w/cm². It is single-ended tubular heating...
CORPORATE HEADQUARTERS. 607 North Central Avenue Wood Dale, IL 60191-1452 USA Phone: 630.350.2252 Toll Free: 888.268.6396 Fax: 630.350.0232 Email: [email protected]...
WATTCO Band heaters can be found in several types of dimension, wattage, voltages and material. Mica band heaters are an inexpensive industrial heating solution that surrounds pipes...
A mineral-insulated band offers the highest temperature capabilities. These deliver more precise results than the other types and can operate under much...





























