Dual voltage solar heating element

Dual voltage solar heating element

This China 12v immersion tubular water heater with thermostat produced by Liangdong have sufficient bearing capacity and superior service life under strong use intensity and harsh environment.
Send Inquiry
Description

Description

 

Solar heating element, sometimes called solar domestic hot water systems -- can be a cost-effective way to generate hot water for your home. They can be used in any climate, and the fuel they use  sunshine  is free.

Immersion heaters use solar power to maintain the temperature in a water storage tank to promise the temperature is consistent. It is a cost effective solution for saving energy.

 

The dual voltage solar heating element is a type of electric heater that can operate both under the control of a solar-specific controller with a low voltage (typically 48V or below safe voltage) and directly connected to a high voltage (220V mains power) environment.
Its core design objective is to achieve both safety and flexibility. It addresses the potential safety hazards and installation limitations that may arise when traditional solar water heaters rely on auxiliary power from the grid during periods of insufficient sunlight.

 

Why is a dual-voltage design necessary? - To address the pain points of the traditional solution
Traditional solution 1: Directly using 220V heating element

 

Safety hazard: Solar water heaters are usually installed on rooftops and are exposed to wind, sun exposure, and rain for long periods. Directly using 220V high voltage electricity poses a risk of leakage due to aging wiring, insulation damage, or lightning strikes, posing a threat to users' safety.


Installation inconvenience: Laying 220V high-voltage cables from the roof to the bathroom is complex and does not comply with some regions' electrical safety regulations.


Traditional solution 2 : Using only low-voltage heating element
Dependence on dedicated controllers: A solar controller that can convert 220V mains electricity into a safe low voltage is necessary. If this controller is damaged, the entire heating function will fail.
Power limitation: To achieve a large heating power (such as 1500W) at a safe voltage, a large current is required, which imposes high requirements on wires and controllers, making it uneconomical.

 

The core of the dual voltage solar heating element lies in its unique resistance wire design and wiring method.
Internal structure:
Inside a heating tube, there are usually two sets of independent resistance wires encapsulated, or through ingenious wiring methods, one resistance wire is "divided" into different combinations.

 

You can imagine its interior as a "heat booster" with two settings: the low setting (low voltage, slow heating) and the high setting (high voltage, fast heating).

 

The dual voltage solar heating element is an excellent product that ingeniously combines safety design with the concept of redundancy backup. Through its internal structure design, it achieves "one set of hardware, two uses", which not only ensures the safety of users' daily use but also guarantees that the basic functions of the system are not affected in case of controller failure. It is an ideal choice for modern solar water heating systems.

 

With the increasing awareness of environmental protection, solar water heaters have become the choice of many families. The heating element in the solar water heater is the important components, and its service life directly affects the use of the entire solar water heater. So, how long can the immersion solar water heater element be used?

1.The material of the heating element

The material of the heating element is one of the key factors in its service life. Generally speaking, the material can be copper, aluminum, stainless steel and other materials, and its service life is also different. Copper corrosion resistance is good, the service life can be 10 years, Aluminum is relatively brittle, easy to corrode, its service life is generally less than 5 years; Stainless steel has the best corrosion resistance and the service life can reach more than 20 years.

In addition to the influence of the material itself, the manufacturing process will also affect its service life. For example, a heating element with a poor process is prone to problems such as shell and core shedding and water leakage, which aggravate the aging and damage of the heating element.

 

2.Water quality and using environment

In areas with poor water quality, the water contains more minerals and impurities, which will precipitate in the heating pipe, form scale, affect the heating effect, and accelerate the aging of the immersion solar water heater element. In the harsh use environment, sun exposure, wind and rain may also lead to aging and damage of the heater element.

Therefore, when using solar water heaters, it is necessary to pay attention to the maintenance of the heating element, such as regularly cleaning and paying attention to protecting the heating element to avoid adverse effects of the external environment.

 

3.Quality and brand

In the market, the brand and quality of immersion solar water heater element is also different. The manufacturing process of some low-quality on the market is poor, and problems such as shell and core shedding and leakage are easy to occur, and the service life is short. Some well-known brands have certain advantages in material, process, quality and so on, and their service life is relatively long.

 

4.Use and maintenance.

Users should do regularly clean, check and maintain the solar water heater element to avoid affecting the heating effect and life due to water leakage, quality problems and other factors. In the process of use, it is also necessary to use reasonably, do not over-open the heating water, and avoid overuse and affect the service life.

Hot water storage cylinders usually include an immersion heater.It is a metal element immersed in water inside the tank. When powered by electricity it heats the water around it.This immersion solar water heater element is isolated with a switch so you can turn it on and off as needed.

Concerning the  material selection, it is necessary to achieve the anti-corrosion and anti-scaling properties of the pipe surface. The electric heating tube is manufactured in strict accordance with the product quality management system standards, the quality is more stable, and has good electrical performance, meet the safety standards for the use of water heaters. Ensure long service life of electric heating accessories used in liquid.

 

 

HTB1WJDXJXXXXXcUXXXXq6xXFXXXt

Data Sheet

Product name

Custom Electric Heating Elements

Pipe material

Stainless steel 304/316/321

Pipe diameter

Ø 3mm-50mm customized

Length

20mm-12m customized

Voltage

12v/24v/48v110v/120v/220V

Resistance error

±2%(Min)

Usage temperature

100℃

Useable medium

Water

Heat efficiency

99.99%(close unlimitedly to 100%)

file0001

file0002.jpeg
file0003.jpeg

Factory View

H1f7507f21cae477091ac55bf5c4a9708v

Application

H8a9abb365ed84d2d87bb39c6a6e171dcq.webp

Certification

H92dba8e93cd444e497e84633e17b35dey

FAQ

1. Q: How to Choose the System Voltage ?

A: We can design the heater element for 12v or 24v tubular heater or 220-380V for normal tubular heating eleemnt.

2. Q: Is there cheap shipping cost to import to our country?

A: For small order,express will be best, for bulk order,sea ship way is best but take much time.

For urgent orders,we suggest by express, big quantity by air.

3. Q: Can I get some samples ?

A: Yes, Sample orders welcomed.

4. Q: What is your minimum order quantity?

A: There's no minimum quantity ,you can buy any quantity. However, few in number, the unit price will be a little higher.

5. Q: How can I know the status of my products ?

A: We will keep you posted for the every production progress like material purchasing, production status, delivery time, tracking number until you recieved the products.

6. Q: Can You Give Me Help If My Products are Very Urgent?

A: Yes, Of Course, We Will Try Our Best to Give You Help. Because We Have Our Own Factory to Produce. We Can Flexible to Adjust Our Production Schedule.

7. Q: What's your packing?What to do in case of damaged goods during transport?

A1: Our Normal packing is bulking in Cartons, less than 20 kgs/carton, 48 cartons / pallet. We also can pack products according to your requirement.

A2: To avoid any subsequent trouble regarding quality issue, we suggest you check the goods once you receive them. If there is any transport damaged or quality issue, don't forget take the detail pictures and contact us as soon as possible, we will properly handle it to make sure your loss to reduce to the smallest.


 

Hot Tags: Dual voltage solar heating element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Universal 1500 watt electric heating element, 1500W High Voltage electric heating element, New Protable 1500 watt electric heating element, Electric Heating Elements, Tubular Electric Heating Element, Electric Heating Element

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.