Description
Keep the hot water heater working on all the time can supply the stable hot water but it will waste much electric energy.
So, you can set a temperature control and thermostat which will cut off it when reach the required temperature.
You can set a low temperature of the thermostat,but keep 50℃ to make sure the bacteria is killed in the water tank.
Our water heater element with thermostat pass the European CE certification standards, meet the water heater equipment safety and accessories life requirements. In terms of material selection, anti-corrosion and anti-scaling properties of tube surface should be achieved.
The production and manufacturing strictly accordance with the product quality management system standards, quality is more stable, and has good electrical performance, to meet the use of boiling water safety standards. Ensure long service life of electric heating accessories in liquid use.
Before getting into details, let's expain how they work.
In each water heater element, there is a thermostat which control the temperature of the water. Heating elements are present in each water heater, if there are two element on top and the other in the bottom, they work separately to heat the water properly.
The top water heating element is the one which turns on first, usually. When it heats the water to a certain temperature, it turns off, and the bottom one turns on.
This cycle repeats only when the heater is filled with water, so that the upper element can detects cool water. When you are showering and using hot water, the tank will heat up from the bottom. This means that the lower heating element will detect cool water first and start the water heating process. As soon as the upper heating element detects cool water, another heating cycle begins.
A thermostat is a key part of each water heating element as it connects to an element.
These types of heating elements are high surface load products and working in the liquid. We use advanced manufacturing technology to make sure the safety and long sevicelife. Immersion heater elements are mainly work in to customers' different requirements of corrosion resistance,it can be made of stainless steel,copper ect.
Bent type water heater element with thermostat is designed with copper plated nickel and surface anti-corrosion pipe and high-grade magnesium oxide.
The ratio between the total length of the heating element and the power is 1:2 or 1:3, and the limit is 1:4, that is to say, the heating length of one meter is 2kw, 3kw, and up to 4kw. The same length, the greater the power, the faster the scaling speed, the shorter the life. Therefore, in order to extend the life of the water heater element, the power per meter is reduced.
Consider the installation of the bent type water heater element: horizontal installation or vertical installation. The installation method is mainly to consider the non-heating area of the heating pipe of the water tank, so as to avoid dry burning when the heating pipe of the water tank is working.
Main features
● Reasonable material selection to achieve anti-corrosion and anti-scaling performance of tube surface
● Manufacturing strict product quality management system standards, quality is more stable
● Good electrical performance, meet the use of sauna, boiling water safety performance
● Leading production process in the electric heating industry to ensure long service life of electric heating accessories
Product detail
Hot Tags: Bent Type Water Heater Element With Thermostat, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Small Water Heating Element, residential solar water heating element, Solar Indirect Water Heater heating element, DC Low Voltage Submersible Double Water heating element, DC solar water heater element, plug in heating element
