Waterproof Anti Scale Solar Water Heater Element

Waterproof Anti Scale Solar Water Heater Element

Description Waterproof scale solar electric heating element is suitable for solar water heaters for auxiliary heating. Waterproof scale solar electric heating element is made of SUS310S material and waterproof scale coating, which effectively prolongs the service life and improve working...
Send Inquiry
Description

Description

 

Consider installing solar panels to power your water heater, it is a more sustainable approach. Solar energy is a renewable resource that can provide a substantial portion of your household's electricity needs. Although the cost of the begining will be high, the long-term savings on your energy bills and it is helpful to environmental impact make it a worthwhile consideration.

 

The solar water heater element is used in commercial water heater. Solar heating element is made of copper nickel plated, corrosion resistant pipe and high grade magnesium oxide material. Product quality through the European CE certification standards, meet the water heater equipment safety and accessories life requirements. In terms of material selection, anti-corrosion and anti-scaling properties of tube surface should be achieved. Production and manufacturing in strict accordance with the product quality management system standards, quality is more stable, and has good electrical performance, to meet the use of boiling water safety standards. Ensure long service life of electric heating accessories in liquid use.

 

These simple but effective heaters are made up of a casing, thermostat, element coil, element base, and fiber washer. Having few components and no moving component make these a great choice for the heating of liquids inside tanks.


At present, the waterproof anti scale solar water heater element on the market are generally equipped with various temperature controllers or thermal protectors. These accessories can cause the heated water to disconnect the circuit and stop heating once the temperature at the test point reaches the set value; when the water temperature at the test point drops to the lower limit value, the device will automatically close. Many manufacturers of solar water heater electric heater demonstrate their products with such temperature controllers by keeping them powered on for a long time in the air, in an attempt to prove that their products can "prevent dry burning". In fact, this so-called prevention of dry burning publicity, if not deliberately misleading by the manufacturers, is either a conceptual misunderstanding of the product manufacturers. In reality, this demonstration itself does not prove that their products can "prevent dry burning"!

 

Waterproof anti scale solar water heater element is suitable for solar water heaters for auxiliary heating. Waterproof heater element is made of SUS310S material and waterproof scale coating, which effectively prolongs the service life and improve working efficiency.

The surface finishment of waterproof scale solar electric heating element is enamel which prevent the water scale stick on the heating tube,so it extend the heating element life.

 

Below is the working environment require and cautions when using solar water heater element.

 

1.The solar water heater element should be positioned and fixed, and the effective heating area must be immersed in liquid , and air dry burning is strictly prohibited. When it is found that there is scale or carbon on the surface of the pipe body, it should be cleaned and reused in time to avoid affecting heat dissipation and shortening service life;

 

2.The wiring part should be placed outside the insulation layer to avoid contact with corrosive, explosive media and water; The wiring should be able to withstand the temperature and heating load of the wiring part for a long time, and the fastening of the wiring screws should avoid excessive force.

 

3.Solar water heater element should be stored in a dry place when not in use, if the insulation resistance is less than 1MΩ for a long time, it can be dried in the oven at about 200 ° C, or reduce the voltage and heat until the insulation resistance is restored.

 

Unlike boiler,the immersion water heater just suppply hot water to home,but it just work with electric power which can also supply by solar panels.Solar water heater works by the heating element which is immersed in the water,it likes a kettle but is bigger.

 If your home is far away and can not us gas,so waterproof anti scale solar water heater element is your good choice.

 

product-1440-1080

 

Main Features

1.We offer standard as well as customized models.
2.We offer different tube diameters like 6.5mm,8mm.8.5mm,9mm,10mm,12mm and others, different length range 10mm to 6000mm .
Voltage: 220V
Wattage:1800W
3.We offer different sheath materials.
4.We offer various shapes as customer demand, immersion heater with flange or screw, explosion proof heater.
5.Various terminal options are available .
6.Various shapes and sizes are available.

7.Durable and has longer life.

QQ20210924141930

Surface treatment material:enamel

Enamel is an inorganic vitreous glaze applied on the surface of a metal base. Enamel coating on the surface of Waterproof Scale Solar Electric Heating Element can prevent metal rust, so that when metal is heated, it will not form an oxide layer on the surface and can resist the erosion of various liquids. Enamel products are not only safe non-toxic, easy to wash clean, can be widely used in daily life the use of eating utensils and cleaning products, and in certain conditions, the technicians to enamel coating in metal body of high hardness, high temperature resistance, abrasion resistance and insulation excellent properties, such as making enamel products have more extensive USES. Porcelain glaze layer can also give products with beautiful appearance, decorate people's life. It can be seen that enamel products have both the strength of the metal and the gorgeous appearance of the glaze and the performance of chemical erosion resistance.

Workshop

QQ20211222144835

Advantage 01

Beautiful and easy to install.

Advantage 02

Can be customized according to customer requirements.

Advantage 03

Long service life and small volume of heating device.

QQ20210924142528

FAQ

Q: Is it possible to print my logo on the product?
A: Yes. We offer OEM&ODM services. We can print your own logo on product.

Q: How do you guarantee quality?
A: For certificate, we have ISO9001, CQC, CE, ROHS, BEAB. For practical, we will do 100% inspection during production and before shipment.

Q: What if there is any defective goods in my order?
A: We will take the responsibility of products with quality problems if they are caused by us.


 

 

There is no risk for have a trying order or samples before our cooperations!

Hot Tags: Waterproof Anti Scale Solar Water Heater Element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Customed Immersion Water Tank Heating Element, 3 Phase Immersion Heating Element, stainless steel immersion heater element, 3kw immersion heater element, 4U Type Electric Immersion Water Heating Element, 220V Immersion Heater Element With Thermostat

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.