Data Sheet

1	Model No.	ETWNA-34
2	Material	Copper
3	Power	1500W
4	Voltage	220V
5	Hi-pot test	1800V/S min cold condition
6	Leakage Current	0.75ma max
7	Pipe thickness	0.5mm
8	Heating resistance wire	Ocr25AI5, Cr20NI80 or as custom's requirement
9	Insulation	≧500MΩ

Description

Name:1200W water Heater Brass Flange Heating Element

Material: T2 Copper Diameter:48

Flange:brass flange

Power: 220-240v 1200w Anode:M6

Shape:L shape

Quality:European Standard

Warranty: one year

Certificate: ISO9001.CE. IEC60730

Immersion water heater is a special electrical component that converts electric energy into heat energy. Because of its cheap price, easy to use and easy to install, it is widely used in various heating situations. The service life long.It is used for water heating, water heater, water heater, boiling bucket, water heater, or self-processing water tank, bucket, boiler heating, or other liquid heating.

1200W Immersion water heater with flange go through the process of material prepare,resistance wiring,powder filling,tube shrink,annealing and inspection.

It is strictly forbidden to use it by dry burning or dehydration. If it is not used for a long time, the heating tube should be placed in a dry place with a plastic bag sealed.

Immersion heater element should be placed in a humid environment strictly.

Concerning how to choose the right immersion heater,below is the suggestions for your reference!

Choose the right material:there are copper,stainless steel,titanium and so on,please remember the suitable one is the best.

It must be anti-corrosion,Oxidation resistance.

During use, it is sometimes observed that the Immersion water heater with flange may leak. This not only affects the heating effect but also poses potential safety hazards to the production equipment and the working environment.

If there are any problems in the manufacturing process of the immersion water heater with flange , such as loose welding or substandard material, it will result in a loose connection between the tube body and the flange, thereby causing water leakage.If the temperature is too high, it will cause the heating tube to deform and twist, resulting in gaps at the connection between the tube and the flange, and thus causing water leakage.

After long-term use, the immersion heater may suffer from corrosion and wear and tear. This will cause the tube body to become thinner, the connection points to become loose, and eventually lead to leakage.

Determining the Watts You Need for an Immersion Heater

Choosing the Right Watt Density for an Immersion Heater

Watt density is the amount of power (in watts) an immersion heater produces per square inch of its surface area. One of the main causes of immersion heater failure is using a watt density that's too high, so it's critical to choose the lowest watt density possible. As long as you're using enough watts to heat your liquid, the watt density can never be too low.

Exceeding the maximum recommend watt density can damage the heating element and shorten the immersion heater's service life.

product-181-112 product-180-112

How to understand the double tube heating,stratified heating and 3D quick heating in the water heater?

Double tube heating is easy to understand that it use double heating element and it is used in big volume tank,its heating speed is quick.

The water heater is divided into two layers for heating, when the first layer's heating reaches the locked temperature, it will automatically switch to the second layer heating, when we are using the hot water, when there is no water in the first layer, the second layer water will be pumped to the first layer , and the second layer continues to be heated by water. This will ensure the continuity for the using of hot water and avoid the occurrence of hot and cold water in electric water heaters.

3D rapid heating in fact means the straight tube is changed to a ring heating tube, thereby increasing the heating area of water, combined with the principle of hot water floating, the heating tube is placed near the water outlet to achieve the "rapid heating" function.

product-716-315