Description

Immersion heater element is an accessory which is assembled in the tank which is to heat the liquid inside.

Its power is come from the electric,when the water temperature reach the setting thermostat temperature,the immersion heater will stop work and remain the same temperature for hours.

Immersion heating element is relative cheap and has different material for selection.it is usually used in the area which has no gas for home application,it is treated as the only heat source for heating water.Others use it as center heating or use it in the boiler.

The advantage is that we do not have to worry about the gas or oil lack or leaks.So it is an economic solution for heating water.

But electric is more expensive than oil or gas.

1kw immersion heater element with flange have highly dense, compact structure. As the whole is short and dense, so the stability is good, installation without bracket. The combined type mostly uses argon arc welding to make the electric heating tube connected to the flange, but also can use the form of fastening device, that is, each electric heating tube welded by fasteners. The flange cover is then locked with a nut. Pipe and fastener adopt argon arc welding, never leak. Scientific technology is adopted for the sealing of fasteners. Single support replacement is very convenient.

It is generally used for heating liquid, the design power 2KW per meter power is the most conventional, if the water quality is poor, can be appropriate to reduce the power per meter; If the water quality is very good, you can increase the power per meter, the maximum is generally not more than 4KW per meter.

Is Immersion heater element safe?The answer is yes.They are safe to use if your operate according to the manufacturer's instructions and safety guidelines. But they still require careful handling and safety precautions. Ensure that it is properly grounded and that the connections are secure. Avoid using damaged cords or plugs.

Be careful not to operate the heater at temperatures over its design limits. Overheating can cause damage to the heating element.

What should be paid attention to when immersion water heater element working?

1.The heating area of the tube can not work without water and dry burning.If the immersion water heater work without water,its heat can not be absorbed by the water ,and the heating tube temperature will be higher and be easily broken.

2.The water condition can not be too hard,the water scale forming speed can not be so fast.As we know that the water scale will influence the heating and lead the heating element broken.

How to Measure the BSP Thread size of your Immersion Heater

product-437-186