Description
Single spiral silicon carbide SIC heating element is a rod-shaped non-metallic thermoelectric element which is made of high quality green SiC as the main raw material through processing, high temperature silicification and recrystallization. Compared with metallic heating elements, this element has the characteristics of high operating temperature, oxidation resistance, corrosion resistance, long service life, small deformation, convenient installation and maintenance.
These sic heater is available in different sizes ranging from 12 to 50 mm in diameters and 2250 mm in length. They are spiraled heating elements, shaped in a thin wall and finely grained form of reaction bonded silicon carbide. Sic heater can withstand high electrical loads, rapid heating & cooling cycles and thermal shocks. To suit various heating processes, the elements are available in different forms.
The resistance of SIC heating element varies with temperature and time. The nature of these changes depends on the specific grade of the material and the manufacturer. For most types, the resistance is high when the material is cold and decreases as the temperature rises. It usually reaches a minimum between 800°C and 900°C, and then increases again as the temperature further rises. When kept at high temperatures, the resistance of the material increases over time.
The aging rate is influenced by the surrounding atmosphere, and to a large extent, it also depends on the working temperature (and thus also on the dissipated power). When the resistance of the silicon carbon rod becomes too high, or when the power drops to a certain level, the silicon carbon heating rod needs to be replaced.


Silicon carbide heating element can be directly used in an air atmosphere without any protection atmosphere. Sic heater is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.
If continuous using, it is better to increase the resistance slowly to maintain long life.
When installed in ovens, it is important to avoid rigid fixation of sic heater to ensure that they move freely during thermal expansion.
For optimum oven temperature, the resistance of the heater shall not exceed ± 10%.The resistance of the sic element is shown in chalk at the end of the working part of the heater.The resistance value of the sic heater increased by 30% in the first three hours of operation.
Drawings


How to order ? Pls provide this informations:
1. Type: rod, U, W, H, spiral and double-spiral types
2. OD,HZ,CZ,OL
3. If type U or type W, please mark terminal distance
4. If you have special requirements about resistance, please inform resistance
5. Quantity
Advantage
1. Single Spiral Silicon Carbide SIC Heating Element withstands as high as 1500°C (surface temperature).
6. Heat source is free of noise and air pollution.



FAQ
1. Q: How do I know about the production?
A: We will double confirm your requirements and send you the sample before the mass production.
During the mass production, we will keep you informed of any progress. Besides, we will
do 100% quality inspection before shipment.
2. Q: How to Choose the System Voltage ?
A: We can design the heater element for 12v or 24v tubular heater or 220-380V for normal tubular heating eleemnt.
3. Q:What is the main service of your factory?
A: We focus on heating element for more than 12 years!
Hot Tags: single spiral silicon carbide sic heating element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Furnace Heating Element, Tube Furnace Heating Elements, Furnace Spiral Heating Elements, Carrier Furnace Heating Element






























