Description
The H type silicon carbide heating element is a high-temperature electric heating element made of high-purity green silicon carbide, carbon and the like by high-temperature silicidation. The silicon carbide content is above 98%, so it has substantially the same physical and chemical properties as silicon carbide, and other metals.
H Type Silicon Carbide Heating Element is just one shape ,we can also make U,W. Sic heater is widely used in various electric heating element of glass,chemical, electronic material and so on.
Sic heater can be used directly on the line (fixed voltages) at temperatures up to 2400°F (1315°C). To compensate for the reduced output as the sic heater gradually age or increase in resistance, the furnace or kiln is initially overpowered by 25% to 50%. This type of arrangement eliminates the expensive voltage varying equipment and it is very satisfactory in many applications. It is not recommended when fine process temperature control is required.
Compared with metal electric heating element, sic heater is characterized by high-applied temperature, anti-oxidization, anti-corrosion, long service life, little deformation, easy installation and maintenance.
The key factor for optimal service life of SiC heaters is the correct choice of component surface load according to furnace design, environment and temperature.
As the element is as brittle as ceramic at room temperature, be careful in the course of transportation, opening , installation, replacement and storage. Strong vibration and mechanical shock are not allowed in order to avoid any damage.
The nominal resistance value written on the cold end should be inspected before installation. If it is not clear to identify, new test is needed. All Yuhao heating elements are tested at 1050℃, in open air.Thus you can get the voltage and current and caculate the resistance according to Ohm's law.
To match elements by resistance into groups, merely select elements with similar or nearly similar test amperages. When the outside diameter is ≥Φ12mm, the tolerance is ≤0.2Ω, when ≤Φ8mm, ≤0.5Ω.
The temperature rise rate in the oven box should not exceed 350°C for 1 hour.
Silicone carbide heater can be connected in parallel, in series or in parallel in series. The best option is a parallel join.
In the event of a brief stop of the furnace, the temperature should not drop below 950°C; When the furnace stops for a long time, it is recommended not to open the furnace door within 10 minutes.The oven should be cooled with the door closed.
Feature
1) Rich experience,excellent deigners,we are professional in Sic Heater Rod.
2) Reasonable price. we always provide our cutomers with quality products at much more
reasonable and lower price.
3)More options. Available in various size ,designs. and any custom styles.
4)Eco-friendly All of our materials are AOZ free and low cadmuim.
5)Good ervice, your requirement will be treated very seriously. ,and we provide the best
after -sales service guarantee.
6)Top quality,Quality is the best way to make out customers satisfied, and gain more regular customers.
Data Sheet
|
H type sic heaterOD (Diameter) |
HZ |
CZ |
TL |
Resistance |
|
8mm |
100-300mm |
60-200mm |
240-700mm |
2.1-8.6 ohms |
|
12mm |
100-400mm |
100-350mm |
300-1100mm |
0.8-5.8 ohms |
|
14mm |
100-500mm |
150-350mm |
400-1200mm |
0.7-5.6 ohms |
|
16mm |
200-600mm |
200-350mm |
600-1300mm |
0.7-4.4 ohms |
|
18mm |
200-800mm |
200-400mm |
600-1600mm |
0.7-5.8 ohms |
|
20mm |
200-800mm |
250-600mm |
700-2000mm |
0.6-6.0 ohms |
|
25mm |
200-1200mm |
250-700mm |
700-2600mm |
0.4-5.0 ohms |
|
30mm |
300-2000mm |
250-800mm |
800-3600mm |
0.4-4.0 ohms |
|
35mm |
400-2000mm |
250-800mm |
900-3600mm |
0.5-3.6 ohms |
|
40mm |
500-2700mm |
250-800mm |
1000-4300mm |
0.5-3.4 ohms |
|
45mm |
500-3000mm |
250-750mm |
1000-4500mm |
0.3-3.0 ohms |
|
50mm |
600-2500mm |
300-750mm |
1200-4000mm |
0.3-2.5 ohms |
|
54mm |
600-2500mm |
300-750mm |
1200-4000mm |
0.3-3.0 ohms |


Advantage
1. Strong acid resistance, strong antioxidant capacity; good chemical stability.
2. The surface load density of H Type Silicon Carbide Heating Element is larger than that of the metal electric heating element, the temperature rises quickly, and the thermal efficiency is high;
3. Good resistance to rapid heat and cold, low linear expansion coefficient
4. High thermal conductivity;
5. The use temperature of H Type Silicon Carbide Heating Element is high, the service life is long, and the normal surface atmosphere, the surface temperature of the rod body can reach 1600 ° C, and the continuous service life can reach 2000 h or more;
6. Easy to install and replace;
7. The source of materials is wide.





FAQ
1. Q: Can you give me a discount price?
A: It is dependng on the quantity. The larger the quantity is, the more discount you can enjoy.
2. Q: Can you do the design of package for us ?
A: Yes, We can. after tell us your idea. and we would make the files of your package according your your requirement.
3. Q: How about the machine warranty?
A: Our goods support one year warranty not by personal purpose,support technical service all life.
During the warranty,if machine have problem need change spare parts,we can replace for you charge free.
Hot Tags: h type silicon carbide heating element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Tube Furnace Heating Elements, Furnace Heating Element, Carrier Furnace Heating Element, Furnace Spiral Heating Elements






























