Description
A washing machine is a household appliance that uses a combination of water, detergent, and mechanical action to clean clothes. One of the key components that make this possible is the washing machine element, which is responsible for heating the water to the appropriate temperature during the wash cycle.Our washing machine heating element plays a critical role in the functionality and efficiency of a washing machine.The temperature is controlled by a thermostat, which ensures that the water stays at the right temperature for the duration of the wash cycle.
These drum washing machine heater element is mainly used in washing machine heaters and dryers, etc. It secures a single internal thermal fuse and external thermostat for product safety.
In the field of washing machine heater , an accurate understanding of corrosion phenomena is an essential element in the proper design of immersion heaters. The choice of materials and the correct technical dimensioning of the components allow ETDZ to ensure its products have excellent technical, electromechanical and anti-corrosion properties.
These washing machine heater is made of titanium, stainless steel and special alloys of nickel or chromium, equipped with thermal self-protection devices with adjustable intervention time, consisting of one or two thermal fuses connected in series to one or two phases heating element. In addition to this, external system protection can be investigated to provide temperature control via NTC probes.
When we purchasing the drum washing machine heater element,must consider the power,It is essential that the parameters of the new model be consistent with those of the old model. This will ensure that all washing procedures run smoothly, water is heated quickly and the self-diagnostic system runs trouble-free.
If your washing machine is already very old and it is difficult to find a replacement, it is recommended that you explore a heater model that is compatible with your older equipment. Connecting and installing them can be more complicated than repairing an entire washing machine, but is still a viable solution.
From an economic point of view, trying to repair your washing machine yourself is a cost-effective option. It is that finding new parts for a washing machine design is a challenging task, as these parts are not readily available in appliance stores. However, there are solutions to these problems, you just need to order the necessary components from the service center or online. It is important to note that the cost of these parts can be high.

Drum washing machine heater element is an internal heating device. Its main function is to heat the water to help clean the clothes. Usually, the washing machine sets different washing programs according to the water temperature. The role the drum washing machine heater is to maintain a constant water temperature, thereby ensuring the cleaning effect.
Measurement of the drum washing machine heater element
1. Preparation of Tools
The tools needed during the measurement process are a tape measure, a multimeter and a screwdriver.
2. Remove the heating tube
First, you need to turn off the power of the drum washing machine. Use a screwdriver to remove the cable connector next to the front control panel, and then detach it from the device. At this point, locate the heating tube and use a screwdriver to remove the screws that fix it, and then remove the heating tube from the device. Be sure to carefully check whether the wires are correctly removed during the disassembly process to avoid damaging the wires.
3. Measure the length of the heating tube
Due to the different lengths of the drum washing machine heater element, it is necessary to measure their lengths in order to select the correct model when replacing them. Use a tape measure to measure the length of the heating tube. The specific method is to place the tape measure flat on the surface of the heating tube, then align the tape measure with the end of the heating tube, and read the length of the heating tube.
4. Test the performance of the heating element
After determining the length , it is necessary to check its heating performance using a multimeter. By using the resistance setting on the multimeter, connect the two electrodes in positive and negative directions to the port of the heating tube and read the resistance value. If the resistance value is positive, it indicates that the heating tube is working properly; if the resistance value is zero, it means that the heating tube is faulty
The measurement of the drum washing machine heater is an essential step in maintenance and repair. Accurately measuring the length and testing the performance can help quickly and accurately replace the faulty heating tube. We hope this article will be helpful to readers. More knowledge about home appliance maintenance can be acquired through daily use and accumulation.
When inquire Manufacturing Heating Element for automatic washing machine, please kindly specify:
We custom design various heating elements as your demands. Please kindly advise your specifications.
As high quality drum washing machine heating element has its warranty ,so replace and how to replace is important.
1. Turn off the washing machine and disconnect the power supply to ensure safe operation.
2. Open the casing of the washing machine. The exact method may vary from model to model, but it is usually necessary to remove some screws or clasps to unlock the housing.
3. Locate the heating element. It is a component connected to the water tank inside the washing machine, generally located on the top or side of the washing machine.
4. Disconnect the drum washing machine heating element. Check the connection mode. There may be pipe joints or fastening fasteners. According to the specific connection method, use the appropriate tool (such as wrench, nut knife, etc.) to unlock the connection of the heating pipe.
5. Pay attention to water connections. Make sure to turn off the water source when unconnecting the heating element. (Some models of washing machines may require additional steps to remove the water inlet pipe)
6. Remove the heating element from the washing machine. Gently remove the fixing of the heating tube and slowly remove it from the washing machine.


The excellent performance of our washing machine heating element have won high recognition and praise from many customers. Many customers share their real experience and feelings.
linda, a user from the America, said: "My washing machine use your heating element for more than two years, its heating speed is very fast, and every time you wash clothes, you can save a lot of time. Besides, it has never broken down in the past. It is really durable. "
In the UK, user Jony also praised our washing machine heater: "Before the heating element was always replaced frequently, not only trouble but also a waste of money." When using our washing machine heater, everything has changed. When children at home, the most important thing is safety, your heating element protective measures let me no worries."
In China, the user Mr. Wang shared: "Your element adaptability is very good, and it can meet almost all brands and models of washing machines. Its quality is reliable and the maintenance rate is low, which greatly reduces my after-sales workload."
Data Sheet
|
Main Parameter |
||
|
1 |
Model No. |
WNA-132 |
|
2 |
Tube Material |
SUS304 |
|
3 |
Power |
1000W-3000W +5%, -10% |
|
4 |
Voltage |
220V-240V/50Hz. 110V/60Hz |
|
5 |
Hi-pot test |
1800V/S min cold condition |
|
6 |
Leakage Current |
0.75ma max |
|
7 |
Insulation |
500MΩ |
|
8 |
Heating resistance wire |
Ocr25AI5, Cr20NI80 or as custom's requirement |
|
9 |
Warranty |
one year |

Hot Tags: Drum washing machine heater element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, High Quality Washing Machine Heating Element, High Power Washing Machine Heating Element, Washing Machine Heating Element Without NTC, Washing Machine Heating Element With Thermostat, Automatic washing machine heating element, Washing Machine Heating Element






























