Description
The PTC heating element is composed of PTC ceramic components and corrugated aluminum strips bonded with high-temperature adhesive. This type of PTC heater has the advantages of low thermal resistance and high heat exchange efficiency. It is an automatic constant-temperature and energy-saving electric heater. One of its prominent features lies in its safety performance. Under any application conditions, it will not cause the surface "redness" phenomenon like other heaters, thus avoiding safety hazards such as scalding and fire.
The Positive Thermal Coefficient (PTC) technology is advantageously used for heating. Due to the self-regulating properties of the heating cartridge, the supplied and emitted power is automatically reduced. - truly self-sufficient - self-regulating - no risk of overheating - no thermostat-controlled cycle - can be installed in any position
PTC Heating rod is the most commonly used aquarium hardware, used for heating the water in the aquarium, according to its principle and structure,there are two types one is electronic, using thermistor detection and control temperature, the other is bimetal sheet mechanical temperature control heating rod. It is usually replaced every two years or so.
PTC ceramic heating rod is now commonly used ceramic heating rod.It has the advantages of small thermal resistance and high heat exchange efficiency. It is an electric heater with automatic constant temperature and power saving.Built-in safety and overheat protection - this is an excellent feature. When the liquid and the heating element are close to the target temperature, the PTC heating element will automatically reduce its power output. Even when started with low liquid or no liquid at all, it can prevent dangerous overheating. This is inherently safer than traditional constant-power components.Precise and stable temperature control: By automatically adjusting its heat output, the PTC heater can maintain a consistently high temperature, and in many applications, no complex external controller is required. This stability is crucial for sensitive processes in laboratories, food production, or agriculture.
When using the PTC heating element for fish tank,we must pay attention to the following points:
1.Do not electrify the heating rod in the air. Because it heats up very fast in the air, it can burn the heating rod, or break the glass or burn the hand. Even after the power is off, it can not be taken out of the water immediately, and the temperature at this time is very high, and it is also easy to burn people and burn the heating rod.
2.When changing the water, be careful, do not let the water level get too low to expose the PTC heating rod.
3.Always observe the heating rod and thermometer, do not rely on the lamp of the heating rod, should be based on the water temperature.
It is also important for the place of the PTC heating rod.The heating rod should not be buried in the bottom sand or in direct contact with the glass.It is better to lay the heating rod sideways or flat, although this may not look good.
It is better to add a casing to the heating rod to prevent the fish from burning. If there are two PTC heating element inside the finsh tank, try to divide them on both sides of the finsh tank and heat them evenly. The thermometer should be placed furthest away from the heating rod to ensure that the water temperature is not coming from the hot water that has just been heated.



Features
1.It heats up quickly, can control the temperature automatically even when the fan malfunctions, and has a long service life.It has a wide voltage application range and can be designed as needed within the range of 12V to 380V .The design is convenient, allowing for arbitrary design from low power to high power, and the shape can also be designed as required.
2.The PTC heater is cost-effective and has a long service life.It is safe and environmentally friendly.It saves electricity.
Hot Tags: ptc heating element for fish tank, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China, Electric Elements For Heated Towel Rail Radiators, Towel Radiator Heating Element With Timer, Stainless Steel Electric Bathroom Towel Radiator Heating Elemen, thermostatic heating elements, Thermostatic Electric Heating Elements for Towel Rails, Electric Heating Elements for Heated Towel Rails






























