Description

The heating element in your oven consists of a metal rod through which an electrical current is passed. The rod is surrounded by insulation material(magnesia powder), and this insulation is surrounded by metal tubing. When an electric current is passed through the rod, the rod heats up.

Oven bake element is easy to install and maintain.With tubular elements, also answer the need for liquid immersion applications requiring high kilowatts in small tanks. The tubular element's unique flat surface geometry packs more power in a smaller bundle, with lower watt density, making it especially well-suited for petroleum-based liquid heating applications.

More people prefer electric rather than gas oven according to safety.However,electric oven heating element is still possible to explode.

The following reasons should be considered:overheating heating elements, loose connections, and exposed receptacle wires can cause the element to explode. Besides that, elements that experience excess damage or wear can also explode inside the oven compartment.

The voltage is 220V and the power is 2000W and can offer sufficient energy to achieve optimal cooking performance, ensuring that food is cooked evenly and effectively.

Common applications of electric oven heating element include various types of grills used in restaurants, catering services, and outdoor BBQ events.It is suitable for cooking different types of food, including meats, vegetables, and even pizza. Compared to other heating element designs, the tubular configuration is welcome due to its efficiency and lower energy consumption. Moreover, it is easier to replace.

Electric oven heating element plays an indispensable role in modern grilling technology.

Overheating Elements
The first reason for an exploding element is that the one in your oven has overheated far beyond what the element can sustain.

Unfortunately, a heating element that suffers enough damage can eventually expose the electrical wiring inside it. A short circuit can occur between the wire and the metallic parts outside when that happens.

As stainless steel's heat transfer faster, corrosion resistance, high temperature resistance, so electric oven heating element is basically made of stainless steel.

The shape of electric oven heating element can be a font, U and M type. Concerning a font type, there must be 4 pcs to start, if you can reach 6 is the best, because the more heating is more uniform. As to the M type heating tube, because the heating coverage becomes larger, the heating is relatively uniform, so it is also a good choice. U-shaped center temperature is low, easy to coke around, less heating tube, is the most uneven heating tube shape, try not to choose.

If the electric oven heating element do not work,how to deal?

product-465-310

First, check the power connection:

Make sure the oven's power is properly connected. Check that the power plug is attached to the outlet and that the outlet is not disconnected or tripping. You can try plugging other electrical devices into the same outlet to verify that the outlet is powered properly.

Two, check the heat control switch:

The heating element under the oven is usually controlled by a heat switch. If the oven heating element does not heat up, it may be due to the fault of the thermal control switch. Try adjusting the settings of the heat control switch to make sure it is in the correct temperature and heating mode. If the switch is damaged, it may be necessary to replace the thermal control switch. It is best to maintain it by professional technicians.

Three, check the oven heater element itself

The electric oven heating element itself may have problems, such as damage or burn out. Inspect the heating element for visible damage or scorch marks. If the heat pipe is found to be damaged, it is recommended to replace it with a new one, preferably by professional maintenance and replacement.

product-500-141

Characteristics & Properties

· Tube diameter: Φ6mm-Φ30mm

· Tube Material: SS201, SS304, SS316, SS321 and INCOLOY800 etc

· Insulation Material: MgO

· Conductor Material: Nichrome Resistance Wire

· Wattage Density: High/Middle/Low (5-25w/cm2)

· Lead Connection Option: Threaded Stud Terminal or Lead Wire

· Lead Wire Type: 300mm Standard (Teflon/Silicone High Temperature Fiberglass are available for Electric Oven Heater)

When it comes to the material choice of the oven heating element, I believe that many people will be concerned, after all, many people's cognition of the steam oven stays at the level of the traditional oven, and they will think that the heating element is easy to break after encountering steam, which will reduce the service life of the machine.

In fact, the development of steam oven technology has been nearly mature, there are no defects, the general machine life of 5 to 10 years is no problem.

Many oven businesses will also mention blue technology, in fact, this is a process for the surface treatment of steel materials. It is heated in the air or directly immersed in the concentrated oxidation liquid, so that the surface of the formation of a layer of about 1 micron oxide film, the purpose is to improve the friction resistance and corrosion resistance of steel parts. Therefore, electric oven heating element using bluing technology is much better than the ordinary stainless steel , and the service life is greatly extended.

Process

Applications

QQ20220601135342

Dimeter of tube	6.5mm	8.0mm	8.5mm	9.0mm	10mm	11mm	12mm	14mm	16mm
Material	AISI304*		AISI321*		AISI316		AISI310S		INCOLOY840
Length of tube	From 200mm to 6500mm, The length will be manufacture it according to custom's require
Length of wire	From 200mm to 2000mm, The length will be manufacture it according to custom's require
Color	Color of tube is yellowish*or Dark-green or Black