Nickel alloy wire for heating element

Nickel alloy wire for heating element

Description Nickel Wire 200 Nichrome Alloy heating resistance has excellent mechanical properties, high corrosion resistance in ifferent environments, and magnetic feature,high heat transfer, high conductivity, low gas volume and low vapor pressure. Heat resistant wire also has good spot welding...
Send Inquiry
Description

Description

 

Nickel alloy wire for heating element has excellent mechanical properties, high corrosion resistance in ifferent environments, and magnetic feature,high heat transfer, high conductivity, low gas volume and low vapor pressure. Resistance heating wire also has good spot welding properties and high tensile strength. Heat resistant electrical wire mainly used in lithium batteries, battery ear, metal stamping parts, electric vehicles, nickel batteries,telecommunications, electric vacuum, special bulbs and other industries.

 

Nickel-Chromium (Ni-Cr) Alloy is one of the most widely used materials for heating elements due to its ductility, high resistivity, and oxidation resistance even at high temperatures. The most common composition of nickel-chromium alloys is 80/20 or 80% nickel, 20% chromium. Other compositions are available depending on the manufacturer.

 

Nichrome resistance wire has good electrical conductivity and corrosion resistance, its high melting point, within the working temperature range of the cathode, evaporation; Have enough heat evaporation, and have good machining performance and formability; Nickel Wire 200 Nichrome Alloy heating resistance has a good effect on the emission of the cathode, and has an appropriate resistivity, good radiation coefficient and large heat conduction coefficient. Therefore, it is mainly used for corrosion resistant components.

 

The main process for preparing nickel resistance alloy wire is to use vacuum melting combined with electroslag remelting, then cast the alloy ingot into a hot forging billet, polish the billet finely, and then conduct hot rolling processing. After heat treating the hot-rolled round bars, repeatedly draw the wire, and then perform hydrogen protection heat treatment and annealing until it is drawn to the finished fine wire. Finally, conduct hydrogen protection heat treatment and annealing again.

At present, there are no industrial standards for nickel resistors and nickel resistor wire materials in our country. Through multiple adjustments of the elemental composition of nickel dilute alloys and the adoption of appropriate heat treatment processes, a nickel resistor wire material suitable for a certain temperature sensor has been successfully developed. Experimental results show that the resistance temperature coefficient a of the developed nickel resistor wire material is 0.00586/C, meeting the usage requirements. The performance of the wire material is stable and is suitable for the fabrication of airborne nickel resistive temperature sensors.

 

Nickel alloy wire for heating element can be classified into N4 and N6 type according to the material.

 

In industrial applications, especially under lower temperature conditions, nickel resistors can partially replace platinum resistors and have broad application prospects. Under normal circumstances, the chemical properties of nickel wires are relatively stable. Moreover, nickel wires can also form a dense layer of nickel oxide on their surface, which provides protection.

 

The resistance of metals and alloys increases with rising temperature, but generally, the resistance temperature coefficients of high-purity metals and rare alloys are larger. The nickel resistance wire which used for temperature measurement is usually made of pure nickel, which has high stability. The resistance temperature coefficient of the alloy can be adjusted by adding a small amount of alloying elements.

 

 

N4 interchange pure nickel wire

N4 nichrome resistance wire has good mechanical strength, corrosion resistance and high heat resistance, suitable for the production of vacuum devices, electronic instrument components, chemical production of strong alkali screen, etc.

N4 nichrome resistance wire is suitable for radio, electric light source, mechanical manufacturing, chemical industry, is an important structural material in vacuum electronic devices.

 

N6 nichrome wire for heater

N6 nickel wire characteristics: N6 nickel wire in addition to the physical and chemical properties of metal nickel, but also has strong alkali resistance, neutral and weak acid, and in the atmosphere, fresh water and sea water. It is mainly used for making all kinds of strong alkali resistant equipment, and its product shapes are tube, plate, rod, belt, wire and so on.

 

Data Sheet

 

 

Grade Ni+Co Cu Si Mn C Mg S P Fe
N4 99.8 0.015 0.03 0.002 0.01 0.01 0.001 0.001 0.04
N6 99.6 0.1 0.1 0.05 0.1 0.1 0.005 0.002 0.1
Ni201 ≥99.0 ≤0.25 ≤0.35 ≤0.35 ≤0.02 / ≤0.01 / ≤0.40
Ni200 ≥99.2 ≤0.25 ≤0.35 ≤0.35 ≤0.15 / ≤0.01 / ≤0.40

 

Product detail

 

H62baf7ef23ae4b219e6248136fc1e594j.webp

HTB1eOjxbizxK1Rjy1zkq6yHrVXaw.webpHTB1tGjEbiDxK1Rjy1zcq6yGeXXam.webp (1)HTB1tGjEbiDxK1Rjy1zcq6yGeXXam.webpHTB1ulcXP4naK1RjSZFBq6AW7VXaM.webp

 

 

Process

 

H6f90ec495537415d8421c8e91ddef3e4W.webp

 

H5566cb0831734508888e7069bc7dda20H.webp

 

 

 

Hot Tags: Nickel alloy wire for heating element, China, suppliers, manufacturers, factory, customized, wholesale, free sample, made in China

Send Inquiry

Customer First

We transform your requirements into customer-centric, technologically advanced and economical solutions.